Carpentry Resources & How-To Tips: Woodworking Tips, Tools, Plans, Finishing & Hardware

<< HOME | Glossary | Books | Dust Control


The Modern Home Workshop

Do-it-Yourself Log Home / Cabin

A Place of Your Own Making: How to Build a One-Room Cabin, Studio, Shack, or Shed

DIY Guide to Small Buildings: Designing and Constructing Outbuildings, Sheds and similar projects

Wood Projects to Enhance Your Workspace

Learn about Woodworking:

Low-Maintenance Furniture and Cabinets

Glossary of commonly-used carpentry terms.

Glossary of commonly-used wood and carpentry terms as related to Building and Construction Materials, including:

Creating The Perfect Carpenter's Workshop:
Part 1 | 2 | 3 | 4 | 5 | 6 | 7

Learn more about Commercial Lumber Sizes

Woodworking Joints and Custom Shelving

Building Layout

Carpentry Tools: Visual Guide
1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 | 10 | 11

Green Renovation and Remodeling:

Controling Woodworking Noise

Dust Control

  • Woodshop Dust Control
  • Getting Tough on Dust: Woodshop Dust Control (part 2)
  • Buying Guide to Dust Collectors

How to Plan & Build Bookcases, Cabinets & Shelves

DIY and Custom-Made Storage Solutions: Components You Can Build for Home, Office ... as a Hobby or for Sale (Profit, earn Income)

  1. Storage Components
    1. Shelves
    2. Pockets
    3. Dividers
    4. Modules
    5. Rollouts
    6. Cases and Chests
    7. Tops, Doors, and Toes
    8. Racks
  2. Tools, Techniques, and Tips
    1. Materials
    2. Spans and Loads
    3. Sizing Up Your Space
    4. Layout and Cutting List
    5. Cuts and Joints
    6. Detail Milling and Edging
    7. Drilling and Fastening
    8. Gluing, Clamping, and Assembly
    9. Doors and Drawers
    10. Face Frames and Miter Boxes
    11. Hardware
    12. Finishing


Carpentry/Woodworking Book


Finishing FAQ

Nordy Rockler founded our vendor partner, Rockler Woodworking and Hardware, in 1954. Over the last half century, Nordy has spent thousands of hours in the workshop, building projects and perfecting his finishing techniques. He is regarded by many as a finishing expert, and has developed a number of Rockler exclusive finishes. Below Nordy discusses the art of finishing and some of his favorite products.

Woodworkers often say that finishing is the part of the process they struggle with most. Do you share that struggle, and why do you think that is?
Nordy: Years ago it was more of a struggle because there wasn't a variety of good products available. In the earliest times a person would just use an oil pigment, wipe on stain, maybe a coat of shellac as a sealer, and then a varnish, which maybe took 24 hours or more to dry. Because it was so slow to dry you'd get a lot of dust particles settling in it. Today we have such a multitude of products available it is much simpler, especially once you get familiar with the products and use the ones you like. Finishing is the culmination of doing a project. You can put a lot of time and money into the material, and you can botch the whole thing with a bad finishing job. Finishing is a critical part of the whole project.

When did you develop such a strong interest in finishing?
Nordy: Well, when we started the business. Finishes are a crucial part of doing woodworking, so it was just sort of a natural process that I became interested in it. Through looking at various lines and talking to different salespeople, I learned a lot about finishing. I tested a lot of products, and I still am today. To keep on top of it, you really have to keep on trying them and testing them.

What is the main key in getting a great finish on a woodworking project?
Nordy: Two things. First of all, you have to be very patient; don't rush it. And the crucial thing is to test it on some scrap wood and make sure you get the desired effect you really want. Another reason for testing is you have a schedule of finishing materials; test them all the way through the whole process, from beginning to end, and you will get a really good feel for what the end result will be.

How do you decide which finish to put on a particular piece?
Nordy: The type of project really dictates what type of finish you put on it. If you're building cabinets or a bookcase, an oil-type finish is very simple and pleasing, and very easy to repair. I wouldn't recommend an oil finish for a dining room table, because you need more protection. You need something harder, more durable, and waterproof. It all depends on what you're building. It also has to do with personal preference. Do you want a gloss, a semi-gloss, a flat finish? Does the piece need a lot of protection? Does the piece need to match another piece in the room? There's a lot of considerations.

What are the benefits of shellac and Rockler's shellac kits?
Nordy: Shellac is a different type of material, and not necessarily used as a top coat. It's a multi-purpose product. It was very popular in the 1700s, and a lot of the antiques were finished with it because that was the only finish available at the time. It has its advantages. It dries very fast and gives you a nice appearance. But it does have its drawbacks. It is not completely water resistant, and it can be brittle. Sometimes it's the finish you have to use, especially for the furniture restoration people who want to get a piece as close to the original as possible. The pre-mixed stuff you buy off the shelf in a hardware store has a limited shelf life. It's usually only good for six months after you open it up. If you buy shellac in flake form you can mix it yourself very easily just by mixing with denatured alcohol in different proportions. If you want to use it for a sealer, or wash coat, you use a thin solution, what they call a two-pound cut shellac. If you're using it as a top coat or finish you want it a little thicker, you want a four-pound cut. We came up with our new shellac kit because we had previously been selling it by the pound, which is a lot of shellac flake for the average consumer. So we packaged it into a smaller 2 oz. size, and they can make a two-, three- or four-pound cut, whichever they want, and it has a graduated scale on the container showing what proportions of denatured alcohol to shellac to use. It simplified the use of it. We're also going to be offering it in a half-pound container.

Rockler Shellac Kits
Rockler Shellac Kits

On what projects does a woodworker want to use a polyurethane gel?
Nordy: You can use it anywhere you want a urethane finish. Urethanes give you a hard, durable, tough and, in most cases, waterproof finish. A lot of people prefer the gel type for application as opposed to the liquid type you have to brush on. It's just a question of personal taste.

Polyurethane Satin Gel Finish
Polyurethane Satin Gel Finish

When did you develop a relationship with Sam Maloof, who is regarded as one of this country's greatest woodworking craftsmen?
Nordy: I met Sam about 20 years ago at the Southern California Woodworkers Association. They had a big event. That was the first time I met him, and I visited his home, which is really like a museum. He's a great collector himself. He collects Navajo rugs, and he collects pottery. He used to trade some of his stuff for Navajo rugs and pottery. We have a nice relationship. Rockler packages Sam's poly/oil finish. The mere fact Sam Maloof still uses it gives credence to the product.

Sam Maloof's Finishes
Sam Maloof's Finishes

Another highly-regarded finishing expert is Michael Dresdner. How did you meet him?
Nordy: I knew him because of his work. He's a very popular writer and has written a couple of books. I met him a few years ago at a trade show. We sell his books and he writes articles for Woodworker's Journal. He's a contributing editor to our finishing department.

WunderCote, a water-based, wipe-on polyurethane finish, is one of Rockler's newest products. What are the benefits of WunderCote?
Nordy: It's so easy to use. It's in a flip-top bottle, and you just pour it out and use a foam rubber brush over the surface. It dries in about 20 or 30 minutes, although our label says one or two hours. It doesn't require much sanding (with 220 grit paper) between coats, then you can re-coat it. I've done that in half an hour after I applied. it. What's nice about a water-based polyurethane is it dry's faster, is very easy to apply, and easy to clean up. What's different about our finish is others tend to have a plastic look to them when they're finished. Ours has a slightly amber cast to it so it looks more like a varnish finish.

Rockler WunderCote Finish
Rockler WunderCote Finish

Is there anything else you'd like to add about the finishing process?
Nordy: Like any skill or acquired labor, the worst part is fear of doing it. Half the battle is just trying it. There's such an abundance of products out there that there's something for everybody. There's just no end to products. There should be something anybody can apply for a very professional-looking finish.

We're constantly on the lookout for new products that we're testing. We try to have a real wide selection on the internet and in our stores. Usually in each store there's someone that specializes in finishing, and then we have classes at our stores. Mostly it's getting up the nerve to try it and getting used to the products you're using. In a lot of cases it's fun, especially when you have a beautiful project and you want to put the finishing touch on it that enhances the whole project.

Wunderfil Wood Filler
Wunderfil Wood Filler

Whether you're a seasoned pro, a home-improvement enthusiast or a craftsperson, we believe you will find all your woodworking supplies on our web site. People who pursue carpentry all concur: it is a challenging, yet fun and rewarding hobby. The quality and durability of homemade wooden projects simply cannot be beat, regardless of cost.

We are committed to helping you choose the best woodworking tools (such as machinist vise, routers, lathes, saws and mitres), finishing chemicals, plans, carpentry books, hardware (hinges, knobs, handles, screws) and more. Along with woodworking products, we offer helpful tips and information to help you make informed purchasing choices. Our goal is not to clutter your shopping experience with useless junk. From the beginner to the serious carpenter, we have a selection of products to suit a person's level, goal, and experience. We have partnered ourselves with some of the Internet's largest woodworking suppliers to to bring you the very best equipment and supplies, which are also affordably priced and backed by solid customer service.

top of page

Router Table FAQ

router table image

Will my router fit the table?

This table will fit virtually any router. There are a variety of pre drilled plates to choose from when you order. If your router model is not listed, you can order the blank plate, and drill your own mounting holes to match your router.

What size is the mounting plate?

The mounting plate is 8 inches by 11 inches by 1/4 inch thick aluminum machined to within .010 inch flat.

What size is the hole in the mounting plate?

The hole is 3-1/4 inch in diameter.

What if I want to use a raised panel bit in the table?

Since the hole is not wide enough to accommodate many horizontal raised panel bits, we recommend using vertical raised panel bits. We believe this is actually a safer bit and will give a better cut.

How thick is the table top?

The table top is 1-1/8 inch thick. top of page

Recommended Books

The Complete Illustrated Guide to Woodworking
The Complete Illustrated Guide to Woodworking - Three Volume Set: The Complete Illustrated Guide to Shaping Wood, The Complete Illustrated Guide to Furniture and Cabinet Construction, and The Complete Illustrated Guide to Joinery by Lonnie Bird, Andy Rae, Gary Rogowski. back to top

The Complete Book of Woodworking: Detailed Plans for More Than 40 Fabulous Projects
The Complete Book of Woodworking: Detailed Plans for More Than 40 Fabulous Projects
This is a step-by-step guide to essential woodworking skills, techniques, tools and tips. For the beginning woodworker or the most experienced hobbyist, this guide is of incredible value to all. this guide takes the reader from the principles of basic design to essential woodworking techniques to a gallery of 40 complete project plans. More than 1200 full-color photos are included in this guide with tips for shop set-up and safety, how to use tools, make jigs and joints, applying finishes and wood selection. this guide was a main selection of Woodworkers Book Club. back to top

Understanding Wood: A Craftman's Guide to Wood Technology
Understanding Wood: A Craftman's Guide to Wood Technology
by R. Bruce Hoadley
Understanding Wood is the definitive reference on wood technology, and is a keystone of every woodworker's library. The first edition (1980) sold over 128,000 copies: this new edition updates the classic text with new information on new materials: composite board, adhesives and finishes which have been developed since the original edition. There are also 225 brand new colour photographs! Up-to-date and Comprehensive: revised and updated edition of a woodworking classic (Taunton Press, 1980; 1-918804-05-1) which continues to sell thousands of copies a year to this day. New four colour photography is clearer and more informative. Comprehensive: everything you know about wood and wood technology: the nature of wood and its properties, the basics of wookworking technology, using the woodworker's raw materials.

In this essential reference for woodworkers, R. Bruce Hoadley explains everything from how trees grow to how best to cut, season, machine, join, bend, and finish wood. Why do miters open and glue joints loosen? How do you get a really sharp edge? Examples of problems and solutions help woodworkers puzzle through their own projects, while 325 full-color photos and helpful tables illustrate key points. Updated information on composite materials, adhesives, and finishes included.

back to top

More Book Recommendations and Reviews

Carpenty Tool Reviews and Recommendations


Updated: Thursday, 2023-06-22 15:00 PST

- An Internet-Resources network -